PFM Optimized Vertical Domains Operation

	Click the Select Experiment icon to open the Select Experiment window.
	Select the following: Experiment Category: Electrical & Magnetic Experiment Group: Piezoresponse Select Experiment: Piezoresponse - Optimized Vertical Domains
	Click Load Experiment.

See Select Experiment for general information about setting up an experiment.

Several probe types are available for PFM imaging. See PFM Probe Selection for recommended probes.

See Prepare and Load the Probe Holder and Install the Probe Holder on the SPM Scanner for general information about loading probes on the Dimension Icon system.

See Identify the Probe for general information about probe identification in the NanoScope 8.15 software.

Set the Vertical Deflection to 0 V.

See Align the Laser and Adjust the Photodetector for general information about laser and photodetector alignment.

See Load/Unload Sample for a description of the relevant stage system controls.

Several controls are available to assist the user in focusing on the sample surface. See Focus on the Sample Surface for details.

For specific instructions on the scan parameter requirements for this PFM workspace, see Check Optimized Vertical Domain PFM Parameters.

If electrostatic discharge is a concern, set the AC Bias to Disabled before engaging the sample.

You can engage on the sample with a single click of the Engage button. See Engage, Scan, & Withdraw for general information about these steps.

For instructions specific to scanning in PR Mode, see PFM Vertical Domain Scanning.